"Nothing Gold Can Stay" custom mosaic

We recently finished up a large mosaic commission a year in the planning and execution. The inspiration for this piece was the idea of impermanence. We designed a triptych of 12" x 18" panels in Mexican smalti, a type of thick, opaque glass. The title of the series is Nothing Gold Can Stay. Here's a sampling of the boat loads of process shots we took while working on this project.

{Click any image to enlarge.}

Sketch on paper and a mosaic maquette or preliminary model on the left, bags of smalti ready to go on the right.

It's such a pleasure to work with the rich color and texture of smalti. How about those trays full of prepped and sorted material? This project was interrupted from time to time with shows and other smaller commissions. Those trays have been a life saver moving sorted material and projects around the studio as needed.

Kyle installed the finished triptych in his handmade reclaimed oak frames. Johannah signed the backs, and then it was time to come up with a way to photograph the piece. We turned our whitewashed pallet wood wall 90 degrees and hung it from the gantry crane to create a backdrop large enough to hang the three pieces together.

Sea Glass Mirror

We recently had the honor of creating a special custom mirror using sea glass collected by the client over many years.

{Click any of the images to enlarge.}

The mosaic is created from her favorite pieces from her collection. Rather than filling in the entire frame in glass, Johannah used unglazed porcelain to fill in around the glass. This piece has a lot in common with a similar mirror (below) we made from that client's collection of special ceramic pieces.

If you have a collection of material or items that would make a special mosaic mirror frame, you can order your own mirror in our Etsy shop.

Making a Mosaic Coat Rack

In a post on social media a few months ago, we commented that there are a lot of steps to making a mosaic coat rack. So we thought it would be fun to expand on that and share each and every step along the way!

{Click on any of the images to enlarge.}

Kyle starts it off by creating molding from reclaimed wood. We use a few different varieties, with walnut and heart pine showing up most often. Kyle gives the frame an oil finish, creates a backer for the mosaic (also from reclaimed material), and passes it on to Johannah.

Johannah's first step is to seal the backer and mark the outline of the frame to make sure the mosaic stays within the frame boundaries.

Next it's time to select and sort the mosaic material. Johannah likes to combine new and reclaimed material in a way that highlights the reclaimed material.

Once the material is sorted, we finally get to the  mosaic!

After the mosaic has had at least a day to dry, we glue it into the frame.

Once it's glued in the frame, Johannah grouts the mosaic. After the grout is dry, it goes back to Kyle to install his hand-forged hooks, then we stamp the back with the Phoenix Handcraft logo and Johannah signs and dates each piece. Kyle attaches hanging hardware, and at long last, it's ready to go!